Відео

Do I need to disconnect the battery? My blinkers and break light are not working anymore

What an amazing video and teacher , got this installed in about an hour and some change , great product and I would definitely recommend, if they ever make more products for a 2024 mt07 I will definitely buy from these guys again , 10/10

Great video I just received my MT-09 SP 2024 and opt for a Yamaha tidy tail almost identical.

Just installed on my 2023 R3. Perfect fit and great quality.

Received mine today. Thanks for the quality product and installation video.

Nice. Shipped today

I followed all of your steps... Thank you very much Nike💯

Just ordered. Thank you. The first one I put on was cheap and had all kinds of problems.

I got it to fit on the ninja 500 SE 2024, but you will have to remove the black box under the tail, because it's a millimeter too large for the hole in the fender eliminator...

I bought this kit before I technically even owned the bike! Great video! Thank u!

This video helped me install a kit. Thank you

Just ordered one for my new 390. Thanks for the video team! Can't wait to pull my bike apart :)

Will this fit my 2023 ninja 650 now that the turn signals are LED from factory?

Would this also fit the 2024 RC 390?

Hands down one of the best install videos I’ve ever watched. Well done sir!

Does this mount work for the 2024 ninja 500?

Great video, I didn't want to mess with my new bike but now im definitely grabbing a fender eliminator kit. also I had to google what a "formula meter" allen key is, next time i heard you say it, it finally clicked 🤣

Guys and gals, I just bought this and it really is superb. Excellent product.

Dude, can I buy this kit in Europe?

What’s the benefit in this relocation? If you run a full cage it won’t allow you to install this as well. Just curious is all what’s the need🤘🏽

This should work for 2024 svartpilen 401 considering it's the same bike right?

Where did you get that plate holder? Can you send the link of it please

i like it without the washers on the license plate light, its tighter than the oem but still has a little wiggle to it like it was with the oem mounting , i think it will make the bulb last longer since its not a LED

Just installed mine. This instructional video helped out immensely. Just 2 tips for anyone installing this: Use a J.I.S. screwdriver (Japanese Industrial Standard). It looks almost exactly like a Phillips, but it acts much differently. It is designed to not cam out and to not strip. The Phillips was created to cam out so you don’t damage whatever you’re screwing into, such as sheet metal. From what I’ve researched, it was invented because workers kept over tightening screws in war aircrafts and were digging into the sheet metal on the planes. My J.I.S. screwdrivers have a lug on the end of them so you can attach a racket if you wanted to so you could really crank down on the screws. For the turn signals, I went in at an angle and tightened down as hard as I could, and didn’t slip, strip, or cam out at all. For the second tip: Lick your finger and coat all the rubber with saliva before working those pieces in. They go in so much easier. I know that sounds perv, but it works. Thanks again Vagabond for this video, I absolutely love this product. My bike looks so good now!

This video was really useful thanks!

I know it's an old video but I just installed this fender eliminator today. It's a quality piece and looks great. This video helped. Thanks.

Ive installed this today on my mt07 2024 and man… it looks amazing!! Easy to install and as a mechanic i can say its quality. Thank you!!

35 year old here.,I live a somewhat active lifestyle and recently experienced tennis elbow. I had issues with even just taking my blanket off of me while getting out of bed. Feeling all the pain/weakness right outside of the elbow area. I tried this and INSTANTLY felt better. Thank you sir.

Just placed my order. I love the fact that I’m able to use the stock parts and not have to cut and solder the wires.

I need to order mine

Hey thanks for the play by play. Saves so much time just to watch the vid, then get after it.

Will this same fender eliminator work for the 2024 model GSX-S1000? Or do you guys have an updated one? Not seeing any for the '24 listed on your site.

Just installed it on the 2023 model. It seems we don't need the aluminum spacers, or maybe I made a mistake. Also, the rubber parts did not come installed but not a big deal there.

😮ty for the video,I was wondering where I could something like this to put on my 2024 duke 390,I'll probably put a box mounted on it later an see if I like it as well for items to secure an or try door it out for small delivery. Thanks for the info

Extremely good product. Love the fact that it uses all the stock lights. Took about 1.5 hours to install going slow. Looks amazing. thank you for the install video.

Thank you so much for the step by step. Was following it to install a different kit and liked yours way more so i ordered one! Feeding the turn signal connectors through that rubber was a PAIN but it’s on now. Very nice kit

Will this work on a 2024 model?

Good job!

For the 2019+ models with the stiff rubber turn signals, it's much easier to put the spacer on the rubber first then attach to the bracket. Only thing is there's a tiny gap between the bracket and signal now, which is negligible when looking at the difficulty. Use a small flathead to the spacer in, then jab the rubber wjtb the flathead and push to get it into the bracket.

Awesome. I ordered a cheapo one from Amazon and it was garbage. When I looked on here for an install you were the first video. Realizing the eliminator I ordered was garbage, I sent it back and ordered yours. Used the video to install and we're rolling. Thanks for the awesome product and demonstration of how to install. Very appreciated

Thanks!! Super easy install and now it actually looks badass lol

Just installed this kit on my 2024 MT-07 and followed along your install video. Perfect fit and looks great. Thanks for the video.

Where can I buy this please?

Just wanted to say this was an excellent video, down to the pain in the ass rivets in the corner of the undertail upon final assembly. You actually touched on every snag I came across in the install. The kit is nice, though the spacer rings provided can crack if you’re not extra careful. Mine did, but they still function the same and you can’t see it when installed.

Just put mine on. I struggled for 15 minutes to even get the first electrical connector thru the grommet. Then I took a razor knife and carefully sliced it! Opened it up to go around the wires and inserted it into the opening. Once I smoothed the outer lips on both sides the slit couldn't even be seen and no functionality was lost. BTW- I love the appearance of this tail tidy and its utilization of the OEM turn signals.

Installed this tonight on my 2022 MT07. Great fit and finish! Looks awesome. Easy to install due to great instructions from this video, and helpful hardware. You weren’t kidding, the grommets were a challenge to get over harnesses connectors! But not too bad really. Watched the video and mimicked it step by step. I have novice skills, and completed in a little over 2 hours. Having a drill bit adapter that conforms to the hex bits is crucial (1/2”, etc.). Thanks Vagabond. Great product, expert instructional video. Would recommend anyone to your company and products!

How can i use aftermarket indicators?

Is license plate size universal? Can i use it in my asian country?

Does this work on the 2023 Ninja??

Works perfectly for the 2024 zx6r. Just had to remove a plastic insert from the turn signals and put it back in after fitting the rubber part of the turn signal